Find My Path

How To Become A Plumber In Canada In 2026: The Apprenticeship Route

Try it first: Design of Industrial Piping Systems L&T EduTech, 4 weeks at 10 hours a week (4 course series)Start On Coursera

Key Takeaways

  • The fastest realistic route is a sponsored apprenticeship: about 5 years and 9,000 hours in Ontario (8,280 on-the-job plus 720 in-school), with $0 to register, a $150 + HST certifying exam and $60 + HST issuance; the first exam attempt is free for Ontario apprentices completing on or after January 1, 2025.
  • A licence is mandatory in seven provinces: plumber certification is compulsory in Nova Scotia, PEI, New Brunswick, Quebec, Ontario (Skilled Trades Ontario), Saskatchewan (SATCC) and Alberta (AIT), and voluntary in BC, Manitoba, Newfoundland and Labrador and the three territories, per Job Bank.
  • Design of Industrial Piping Systems on Coursera (L&T EduTech, 4 weeks at 10 hours a week) is the try-first pick; it does not qualify you for any provincial plumber licence, registration or certificate.
  • Job Bank lists plumbers under NOC 72300 at a $34.00 national median hourly wage, ranging from $21.00 at the low end to $46.00 at the high end (updated Nov 19 2025); Quebec posts a $40.00 median.
  • Fiona's verdict: plumbing suits hands-on clients who can fund 4 to 5 years of apprentice time, because the Red Seal then travels across all 13 provinces and territories and BC alone projects 2,900 openings between 2025 and 2035.

A plumber plans, installs, tests and services plumbing fixtures and systems: water, hydronic, drain, waste and vent, low pressure steam, residential fire, chemical and irrigation. Becoming one in Canada means a registered apprenticeship, about 4 to 5 years and 9,000 hours in Ontario, capped by a Certificate of Qualification and an optional Red Seal.

Test the field before you sign anything. Design of Industrial Piping Systems is a 4 week, 10 hour a week look at piping systems, and it carries no provincial licence, registration or certificate.

What Are The Ways To Become A Plumber In Canada?

The credentialed way to become a plumber in Canada is a registered apprenticeship that ends in a Certificate of Qualification, with college in-school levels along the way. The online rows below are try-first and prep options only: no Coursera or Udemy course grants a trade credential.

RouteTimeCost (CAD)What You GetRecognised ByBest For
Try first: Design of Industrial Piping Systems4 weeks at 10 hours a weekNot listedShareable Coursera certificateNo trade regulator; not a licence, registration or certificateTesting the piping field before a multi-year commitment
Registered apprenticeship (employer or union sponsor)4 to 5 years; 9,000 hours in OntarioNot listedCertificate of Qualification with optional Red Seal endorsementProvincial regulators; Red Seal Program in all 13 provinces and territoriesAnyone pursuing the C of Q, especially in the seven compulsory provinces
Ontario in-school levels: Plumber - 306A720 hours across 3 levelsNot listedMohawk College Certificate / ApprenticeshipOntario apprenticeship training toward the 306A C of QOntario apprentices with a training agreement
Saskatchewan entry-level option: Plumbing and Pipefittingapprox. 17 weeksNot listedSask Polytechnic Applied Certificate; entry-level practical knowledge and skill developmentNot listedSaskatchewan applicants starting with an entry-level trade program

Fiona's recommendation: take the Coursera test if you are unsure, hunt a sponsor directly if you are committed, and consider Carlton Trail College's entry-level applied certificate if you are in Saskatchewan and want practical trade skills first.

What Is The Fastest Way To Become A Plumber In Canada?

The fastest way to become a plumber in Canada is to find a sponsoring employer or union first: registering the training agreement costs $0. The steps below use the Ontario system as the worked example.

  1. Find a sponsor, an employer or a union, and register a training agreement with your provincial body, for example Skilled Trades Ontario: variable timing, weeks to months, at $0.
  2. Log 8,280 on-the-job hours plus 720 in-school hours across 3 levels: approximately 5 years and 9,000 total hours in Ontario.
  3. Sit the certifying exam or Red Seal exam: $150 + HST per attempt, with the first attempt waived for Ontario apprentices completing on or after January 1, 2025.
  4. Receive your Certificate of Qualification and add the Red Seal endorsement: immediate once you pass.
  5. Renew annually if you practise in a compulsory province: $60 + HST per year in Ontario.

Do You Need A Licence To Work As A Plumber In Canada?

A licence to work as a plumber is mandatory in seven provinces. Job Bank confirms trade certification is compulsory in Nova Scotia, Prince Edward Island, New Brunswick, Quebec, Ontario, Saskatchewan and Alberta, and available but voluntary in Newfoundland and Labrador, Manitoba, British Columbia, the Yukon, the Northwest Territories and Nunavut.

ProvinceRequired?Regulator Or RegistryWhat It Means
OntarioYesSkilled Trades OntarioCompulsory: you must hold a Registered Training Agreement, Provisional Certificate of Qualification or Certificate of Qualification, and appear on the Skilled Trades Ontario Public Register
AlbertaYesAlberta Apprenticeship and Industry Training (AIT)Compulsory certification, per Job Bank
SaskatchewanYesSaskatchewan Apprenticeship and Trade Certification Commission (SATCC)Compulsory certification, per Job Bank
QuebecYesEmploi Québec / CCQCompulsory certification, per Job Bank
New BrunswickYesApprenticeship and Occupational Certification, Government of New BrunswickCompulsory certification, per Job Bank
Nova ScotiaYesNova Scotia Apprenticeship AgencyCompulsory certification, per Job Bank
Prince Edward IslandYesGovernment of Prince Edward IslandCompulsory certification, per Job Bank
British ColumbiaNoSkilledTradesBCCertification available but voluntary, per Job Bank
ManitobaNoApprenticeship ManitobaCertification available but voluntary, per Job Bank

In the voluntary jurisdictions, Newfoundland and Labrador, Manitoba, British Columbia, the Yukon, the Northwest Territories and Nunavut, certification stays available through bodies such as SkilledTradesBC and Apprenticeship Manitoba. My advice is identical either way: without the provincial Certificate of Qualification you cannot add the Red Seal, and the Red Seal is what lets a plumber work across all 13 provinces and territories without re-examination.

None of the online courses in this article changes the table above. A Coursera or Udemy certificate of completion does not register you with Skilled Trades Ontario, does not create a training agreement, and does not exempt you from the 8,280 on-the-job hours Ontario requires. Online study is preparation, not the licence.

Which Plumbing Courses Are Worth Taking In Canada?

Plumbing courses worth taking fall into three groups: short online tests of interest on Coursera and Udemy, exam drilling, and college programs. Some college programs deliver apprenticeship in-school levels; others, such as Carlton Trail College, are entry-level trade programs. Even the in-school levels are training rather than the licence. Here is my read on each option.

Design of Industrial Piping Systems

Design of Industrial Piping Systems is a 4 week, 10 hours a week online course series from L&T EduTech that ends in a shareable certificate.

ProviderL&T EduTech
Length4 weeks at 10 hours a week (4 course series)
Ratingfrom 147 reviews of courses in this program
CredentialShareable certificate
Formatonline

Fiona's take: This is the series I point to when a client wants to feel out the piping side before knocking on doors for a sponsor. It covers industrial piping design, which sits closer to the designer's desk than the installer's toolbox, and Coursera lists 147 reviews across the courses in the program. Be clear about what it is: it does not qualify you for any provincial plumber licence, registration or certificate.

Skip it if: Skip it if you already hold a sponsor and need Level 1 in-school hours, because this delivers neither.

Not a provincial licence, registration or certificate.

Start On Coursera

Trades Math

Trades Math is a 1 hour online course from Interplay Learning that ends in a shareable certificate.

ProviderInterplay Learning
Length1 hour to complete
CredentialShareable certificate
Formatonline

Fiona's take: Apprenticeship schooling leans hard on math, and this single hour tells you whether your fractions and formulas are ready before your in-school levels begin. Interplay Learning built it for the trades generally, not plumbing only, which keeps it relevant across provinces. It does not qualify you for any provincial licence, registration or certificate.

Skip it if: Skip it if trades math is already your strong suit and your time is better spent finding a sponsor.

Not a provincial licence, registration or certificate.

Start On Coursera

Design of HVAC Distribution and Delivery Systems

Design of HVAC Distribution and Delivery Systems is a 6 module online course from the University of Colorado Boulder that ends in a shareable certificate.

ProviderUniversity of Colorado Boulder
Length6 modules
CredentialShareable certificate
Formatonline

Fiona's take: Hydronic systems sit inside the plumber's scope of work, so this course tests a real corner of the trade. It applies engineering principles to water distribution systems, including pipe sizing and pump selection. It does not qualify you for any provincial plumber licence, registration or certificate.

Skip it if: Skip it if your interest is strictly drains, vents and fixtures; HVAC distribution will feel off-path.

Not a provincial licence, registration or certificate.

Start On Coursera

Step by Step Design & Calculation of Plumbing system-Part1/2

Step by Step Design & Calculation of Plumbing system-Part1/2 is a 5 hour 21 minute online course from Design Experts - MEP that ends in a certificate of completion.

ProviderDesign Experts - MEP
Length5h 21m total length
Rating4.5 out of 5
CredentialCertificate of completion
Formatonline

Fiona's take: Rated 4.5 out of 5, it focuses on plumbing design calculations. I treat it as a screen for clients drawn to the calculation side of plumbing work. It does not qualify you for any Canadian provincial certification.

Skip it if: Skip it if your goal is the Certificate of Qualification; no Udemy completion counts as provincial in-school training.

Not a provincial licence, registration or certificate.

View On Udemy

F28-N National Journeyman Plumber with Gas Mock Tests

F28-N National Journeyman Plumber with Gas Mock Tests is a set of 3 online practice tests from Shilpi Jain with no credential listed.

ProviderShilpi Jain
Length3 practice tests
Formatonline

Fiona's take: Practice tests build exam stamina, and gasfitter training appears alongside plumber in Camosun College's BC pipe trades programs. Treat this package as practice-test material only; it does not provide a provincial licence, registration or certificate. Match your real prep to the Canadian exam you will actually face.

Skip it if: Skip it if you are preparing specifically for a Canadian Certificate of Qualification exam.

Not a provincial licence, registration or certificate.

View On Udemy

Plumbing Apprenticeship Level 1

Plumbing Apprenticeship Level 1 is a 240 hour, 6 to 8 week in person program from Confederation College in Ontario that delivers the first in-school level of the apprenticeship.

ProviderConfederation College
Length240 hours (6–8 weeks)
CredentialApprenticeship training
Formatin person, Ontario

Fiona's take: This is the real thing: Level 1 classroom hours for Ontario apprentices. Those 240 hours are a third of the province's 720 in-school requirement, so you know exactly what block you are buying. It is apprenticeship training, not a Certificate of Qualification.

Skip it if: Skip it if you are outside Ontario; BC, for example, structures its plumber training as 6,300 work-based hours plus 30 weeks of technical training through SkilledTradesBC.

See Program Details

Plumbing and Pipe Trades Apprenticeships

Plumbing and Pipe Trades Apprenticeships is a 6 to 10 week on campus program from Camosun College in British Columbia that ends in Technical Training Certification.

Screenshot of the Plumbing and Pipe Trades Apprenticeships program page on the Camosun College website
The Plumbing and Pipe Trades Apprenticeships page on the Camosun College website.
ProviderCamosun College
Length6 to 10 weeks
CredentialTechnical Training Certification
Formaton campus, British Columbia

Fiona's take: Camosun delivers the in-class portion of technical training in the pipe trades family that includes plumbing, on campus. Certification is voluntary in BC through SkilledTradesBC, but this training still feeds the Red Seal pathway. I suggest it for BC apprentices seeking 6 to 10 week on-campus technical training.

Skip it if: Skip it if you are pursuing the Ontario 306A; the hour structures do not match.

See Program Details

Plumber Apprenticeship Harmonized

Plumber Apprenticeship Harmonized is an on campus program from North Island College in British Columbia where each level takes 6 to 8 weeks, on a Red Seal apprenticeship pathway.

Screenshot of the Plumber Apprenticeship Harmonized program page on the North Island College website
The Plumber Apprenticeship Harmonized page on the North Island College website.
ProviderNorth Island College
LengthEach level takes 6 to 8 weeks
CredentialRed Seal apprenticeship pathway
Formaton campus, British Columbia

Fiona's take: Harmonized levels line up with the Red Seal standard, and the 6 to 8 week per level format suits apprentices juggling job-site release. North Island College delivers it on campus in British Columbia. Finishing levels is still not the same as holding the Certificate of Qualification; the exam comes after the hours.

Skip it if: Skip it if you cannot attend in person; no online delivery is listed.

See Program Details

Plumber - 306A

Plumber - 306A is a 720 hour, in person program from Mohawk College in Ontario covering the 3 in-school levels of the 306A plumber apprenticeship.

Screenshot of the Plumber - 306A program page on the Mohawk College website
The Plumber - 306A page on the Mohawk College website.
ProviderMohawk College
Length720 hours in-school (3 levels)
CredentialMohawk College Certificate / Apprenticeship
Formatin person, Ontario

Fiona's take: Mohawk packages the entire Ontario in-school requirement, all 720 hours across 3 levels, and the numbers line up exactly with what the Ontario registry expects. You leave with a Mohawk College Certificate on the apprenticeship track. The Certificate of Qualification still requires the certifying exam at $150 + HST, waived on the first attempt for completions on or after January 1, 2025.

Skip it if: Skip it if you are still sponsor hunting; the in-school levels pair with on-the-job hours.

See Program Details

Plumbing Techniques - Apprenticeship

Plumbing Techniques - Apprenticeship is a 24 week, 3 level in person program from Algonquin College in Ontario that ends in an Ontario College Certificate.

Screenshot of the Plumbing Techniques - Apprenticeship program page on the Algonquin College website
The Plumbing Techniques - Apprenticeship page on the Algonquin College website.
ProviderAlgonquin College
Length24 Weeks (3 levels)
CredentialOntario College Certificate
Formatin person, Ontario

Fiona's take: It is a 24 week, in person, 3 level Ontario program ending in an Ontario College Certificate. The certifying exam and its $150 + HST fee still sit at the end of the road.

Skip it if: Skip it if you need evening or online study; this program is in person only.

See Program Details

Plumbing and Pipefitting

Plumbing and Pipefitting is an approximately 17 week in person program from Carlton Trail College in Saskatchewan that ends in a Sask Polytechnic Applied Certificate.

Screenshot of the Plumbing and Pipefitting program page on the Carlton Trail College website
The Plumbing and Pipefitting page on the Carlton Trail College website.
ProviderCarlton Trail College
Lengthapproximately 17 weeks
CredentialSask Polytechnic Applied Certificate
Formatin person, Saskatchewan

Fiona's take: This is the entry-level Saskatchewan option I mention to local clients: practical knowledge and skill development in plumbing and pipefitting, ending in a Sask Polytechnic Applied Certificate. It suits someone building base skills in the pipe trades before committing to the longer path. It is not the Certificate of Qualification, which comes through the apprenticeship route in a compulsory-certification province.

Skip it if: Skip it if you are outside Saskatchewan, where your own regulator sets the path.

See Program Details

How Much Does It Cost To Become A Plumber In Canada?

The cost to become a plumber in Canada is dominated by time, not fees. Ontario's listed government charges are $0 to register a training agreement, $150 + HST for the certifying exam, $60 + HST to issue the Certificate of Qualification and $60 + HST per year to renew it.

ItemCost (CAD)Notes
Training agreement registration with a sponsor$0Skilled Trades Ontario; the sponsor search itself runs weeks to months
Certifying exam (Ontario)$150 + HSTPer attempt, paid on the Skilled Trades Ontario Portal; first attempt waived for apprentices completing on or after January 1, 2025
Certificate of Qualification issuance (Ontario)$60 + HSTCharged once you pass
Annual renewal (Ontario, compulsory trade)$60 + HSTDue each year while you practise
Coursera try-first coursesNot listedTrades Math is 1 hour; Design of Industrial Piping Systems is 4 weeks at 10 hours a week
College in-school levelsNot listedExamples: 240 hours at Confederation College, 24 weeks at Algonquin College, about 17 weeks at Carlton Trail College

None of the six college programs on this page lists tuition, so ask each registrar directly before you budget. Compare formats at the same time: Confederation College runs 240 hours for Level 1, Algonquin College compresses the 3 levels into 24 weeks, and Carlton Trail College runs about 17 weeks in Saskatchewan. The fee nobody can shop around is time: about 5 years in Ontario.

The exam line deserves a second look if money is tight. The first attempt is waived for Ontario apprentices completing on or after January 1, 2025, which saves the $150 + HST on your first sit. Retries pay full price, which is one more reason to prep before you book.

How Much Does A Plumber Earn In Canada?

A plumber earns a national median of $34.00 per hour, Job Bank reports for NOC 72300, with $21.00 at the low end and $46.00 at the high end, updated Nov 19 2025. The provincial spread below is where planning pays off.

Province Or TerritoryMedian Hourly Wage (NOC 72300)
Canada$34.00
Ontario$32.50
British Columbia$32.00
Quebec$40.00
Alberta$30.00
Manitoba$30.11
Saskatchewan$35.00
Nova Scotia$33.00
New Brunswick$26.00
Prince Edward Island$30.00
Newfoundland and Labrador$27.50
Northwest Territories$38.58
Nunavut$44.82
Yukon$31.02

The spread is regional and wide. Quebec posts $40.00, Saskatchewan $35.00 and Nova Scotia $33.00, while New Brunswick sits at $26.00 and Newfoundland and Labrador at $27.50. Ontario's median is $32.50, Alberta's is $30.00 and British Columbia's is $32.00. Nunavut posts the highest median at $44.82, with the Northwest Territories at $38.58.

The outlook is moderate to good in several provinces. Job Bank's example is British Columbia, which projects 2,900 plumber openings between 2025 and 2035. Pair that with a Red Seal that works in all 13 provinces and territories, and a slow regional market stops being a dead end.

Is A Plumbing Apprenticeship Worth It In 2026?

A plumbing apprenticeship is worth it in 2026 if you can carry a 4 to 5 year build, because the end state is strong: compulsory-trade status in seven provinces, a Red Seal valid across all 13 provinces and territories, and a Job Bank median of $34.00 an hour under NOC 72300. The demand signal is real too, with 2,900 openings projected in BC between 2025 and 2035.

The honest counterweights: nothing starts until you find a sponsor, and that search runs weeks to months with no guaranteed timeline. Government fees are modest, $150 + HST for the exam and $60 + HST a year to renew in Ontario, but the in-school levels mean scheduled time away from the tools and tuition the colleges do not publish here.

I recommend this path to clients who want a licensed, mobile trade with a $34.00 median wage and can tolerate a slow, sponsor-dependent start. I steer impatient clients away from it: plumbing does not compress, and the 9,000 Ontario hours take about 5 years no matter how eager you are.

Can You Get Funding For A Plumbing Apprenticeship?

Funding for a plumbing apprenticeship exists at the federal level, but the program that covers plumbers pays employers rather than apprentices, and it is currently closed to new applications.

  • Apprenticeship Service. A federal program that supports employers to hire new first-year apprentices in 39 Red Seal trades, including Plumber, at $5,000 per eligible new first-year apprentice. It is currently not accepting applications. If it reopens, raise it with a prospective sponsor in your negotiation; the money lands with the employer, not in your pocket.

Plumbing Apprenticeship Questions Canadians Ask

How Long Is The Plumber Apprenticeship In Ontario?

The plumber apprenticeship in Ontario runs approximately 5 years and 9,000 total hours: 8,280 on-the-job hours plus 720 in-school hours spread across 3 levels at a delivery college such as Mohawk College. Registering the training agreement with a sponsor costs $0, and the sponsor search itself can run weeks to months before the first hour counts.

Is Plumbing A Compulsory Trade In Ontario?

Plumbing is a compulsory trade in Ontario. Skilled Trades Ontario states that to practise the trade legally, a person must hold a Registered Training Agreement, a Provisional Certificate of Qualification or a Certificate of Qualification, and their information must appear on the Skilled Trades Ontario Public Register. Working without one of those statuses is working outside the law in that province.

What Is The Red Seal For Plumbers?

The Red Seal for plumbers is a national endorsement added to a provincial Certificate of Qualification. Plumber participates in the Interprovincial Red Seal Program, the national standard for the trade across Canada, designated in all 13 provinces and territories. Holders can work across Canada without re-examination, which matters when regional demand shifts and you want to follow it.

What NOC Code Is Used For Plumbers On Job Bank?

NOC 72300 is the code Job Bank uses for plumbers. You need it to read the right data: NOC 72300 shows a national median of $34.00 per hour, a low of $21.00 and a high of $46.00, updated Nov 19 2025. The same code organizes the provincial medians, from $26.00 in New Brunswick to $44.82 in Nunavut.

How Much Does The Plumber Certifying Exam Cost In Ontario?

The plumber certifying exam in Ontario costs $150 + HST per attempt, paid on the Skilled Trades Ontario Portal. The first attempt is waived for Ontario apprentices completing their program on or after January 1, 2025. Budget the paperwork after it as well: issuance of the Certificate of Qualification is $60 + HST, and annual renewal for a compulsory trade is another $60 + HST.

Where Is Plumber Certification Mandatory In Canada?

Plumber certification is mandatory in seven provinces: Nova Scotia, Prince Edward Island, New Brunswick, Quebec, Ontario, Saskatchewan and Alberta, according to Job Bank. It is available but voluntary in Newfoundland and Labrador, Manitoba, British Columbia, the Yukon, the Northwest Territories and Nunavut. Voluntary does not mean pointless, since the Red Seal still requires a provincial Certificate of Qualification underneath it.

What Is The National Median Hourly Wage For Plumbers?

The national median hourly wage for plumbers is $34.00, Job Bank reports for NOC 72300, updated Nov 19 2025. The range runs from $21.00 at the low end to $46.00 at the high end. Provincial medians stretch from $26.00 in New Brunswick and $27.50 in Newfoundland and Labrador up to $40.00 in Quebec, $38.58 in the Northwest Territories and $44.82 in Nunavut.

How Many Hours Of On-The-Job Training For Plumber In BC?

BC requires 6,300 hours of work-based training plus 30 weeks of technical training over 4 years, per SkilledTradesBC. That is a lighter hourly load than Ontario's 8,280 on-the-job hours, and plumber certification in BC is voluntary rather than compulsory. Colleges such as Camosun College and North Island College deliver the technical levels on campus.

What's The Bottom Line On Becoming A Plumber In Canada?

  • The bottom line on becoming a plumber in Canada: one registered apprenticeship, about 4 to 5 years and 9,000 hours in Ontario, ending in a Certificate of Qualification with an optional Red Seal.
  • Certification is compulsory in Nova Scotia, PEI, New Brunswick, Quebec, Ontario, Saskatchewan and Alberta, and none of the online courses on this page satisfies that requirement.
  • Government fees are modest: $0 to register a training agreement, $150 + HST for the Ontario certifying exam, $60 + HST to issue the C of Q and $60 + HST to renew it each year.
  • Job Bank puts the NOC 72300 median at $34.00 per hour nationally, and BC alone projects 2,900 openings between 2025 and 2035.
  • Test before you commit five years: Design of Industrial Piping Systems takes 4 weeks at 10 hours a week and shows you whether piping systems hold your interest.

About the author

Fiona Thompson

Fiona Thompson is an education consultant who has dedicated her efforts to assisting international students in coming to study in Canada. However, during her work, she realized that many Canadians were unaware of the affordable online options available for studying within their own country. With her extensive research and experience in the education sector, Fiona decided to create CanadaCourses.ca, a website aimed at helping Canadians find the best online course options available across various industries.