Find My Path

Fundamentals Of Engineering Exam In Canada: Costs, Prep And Routes (2026)

Try it first: Fundamentals of Engineering Exam Review Georgia Institute of Technology, 2 weeks at 10 hours a weekStart On Coursera

Key Takeaways

  • The FE exam costs $75 CAD plus GST payable to APEGA and $225 USD payable to NCEES, runs year-round at Pearson VUE centres, and results arrive in 7 to 10 days.
  • The FE exam is not required for P.Eng licensure in Canada. Canadian regulators such as APEGA, PEO and EGBC require an accredited degree, about 48 months of experience and the NPPE. APEGA may assign the FE exam on its own or with other technical exams.
  • The Coursera route, Fundamentals of Engineering Exam Review from Georgia Tech, is a 2 weeks at 10 hours a week review that does not qualify you for any licence; it is a low-stakes way to test where you stand before you pay exam fees.
  • Civil engineers earn a median of $48.56 per hour in Canada (NOC 21300), from $51.69 in Alberta to $47.12 in British Columbia, per Job Bank.
  • Fiona's verdict: the FE exam suits Alberta applicants assigned by the APEGA Board of Examiners and engineers targeting US PE licensure. If your regulator has not assigned the FE exam, focus on the NPPE; if APEGA assigns the FE exam, follow that decision.

The Fundamentals of Engineering (FE) exam is a computer-based test administered by NCEES that confirms the technical knowledge of engineering graduates in one of seven disciplines. The direct answer: the FE exam is not mandatory for P.Eng licensure in Canada. Canadian P.Eng licensure rests on an accredited degree, experience and the NPPE, and the FE exam only enters the picture when a regulator assigns it or when you want a US PE licence.

Where it does matter, it matters a lot. In Alberta, the APEGA Board of Examiners can assign you the FE exam to confirm your technical engineering knowledge, and APEGA is explicit that you should not write it before receiving a BOE decision, because you may not need it at all. This page lays out routes, real costs and prep options.

A woman in her late twenties sits at a study desk in a quiet corner of an Edmonton public library, seen from the side, her face turned toward a paper

What Are The Ways To Take The Fundamentals Of Engineering Exam In Canada?

The FE exam reaches Canadian engineers through two routes, the APEGA-assigned or confirmatory route and the US PE licensure route built on the same NCEES exam, with a Coursera review course as a prep option before you commit fees.

RouteTimeCost (CAD)What You GetRecognised ByBest For
Fundamentals of Engineering Exam Review prep first, then decide2 weeks at 10 hours a weekNot listedShareable certificate; reviews FE material, particularly Civil and Mechanical topicsNo regulatorTesting your readiness before paying exam fees
FE exam through APEGAVaries; exam offered year-round$75 CAD + GST to APEGA, $225 USD to NCEESFE exam pass (not a licence)APEGA for applicants; NCEES for US statesAlberta applicants assigned the exam by the Board of Examiners
Canadian P.Eng licensure (NPPE primary; FE optional or assigned)4+ years experience post-degreeAbout $500P.Eng licenceProvincial regulators such as APEGA, PEO and EGBCEngineers who plan to practise in Canada only

I recommend the prep-first Coursera route for anyone who has been out of school for years, and the APEGA route for applicants the Board of Examiners has actually assigned the exam to.

What Is The Fastest Way To Write The FE Exam In Canada?

The fastest way to write the FE exam from Canada runs through APEGA and NCEES, because the exam is offered year-round at Pearson VUE centres rather than on fixed dates.

  1. Apply to your provincial regulator, for example APEGA, for assessment. Timing varies. If APEGA assigns the FE exam, the FE-specific fees listed are $75 CAD plus GST to APEGA and $225 USD to NCEES.
  2. If assigned, register via myAPEGA for the FE exam. Processing time applies, and the APEGA administration fee is $75 CAD plus GST.
  3. Register and pay NCEES, then schedule your seat at a Pearson VUE testing location. The NCEES exam fee is $225 USD, and availability is year-round.
  4. Write the FE exam: 110 multiple-choice questions over 6 hours at a Pearson VUE centre, including locations in Edmonton and Calgary. Results arrive in 7 to 10 days.
  5. If your goal is a Canadian P.Eng rather than exam confirmation, move to the NPPE and competency-based assessment instead, which most provincial regulators require, unless your regulator assigns the FE exam to you.

Do You Need The FE Exam To Become A P.Eng In Canada?

No, the FE exam is not a requirement for P.Eng licensure in Canada. Across Canada you generally need an accredited or assessed-equivalent engineering degree, acceptable engineering experience of about 48 months at most regulators, a competency-based assessment, and the NPPE, which covers ethics, law and professionalism.

ProvinceRequired?Regulator Or RegistryWhat It Means
AlbertaNot mandatory; may be assignedAPEGAThe APEGA Board of Examiners may assign you the FE exam, on its own or with other technical exams, to confirm your technical engineering knowledge. Do not write it before a BOE decision, as you may not need to write it.
Other provincesFE not mandatoryPEO, EGBC and other provincial regulatorsOther regulators use their own technical exams or syllabi rather than the FE exam.

The FE exam is a confirmatory tool, not a gate. APEGA members, members-in-training and applicants may write the exam, and it is offered year-round, but the Board of Examiners decides case by case whether you need it. Writing it before that decision, and paying the $225 USD NCEES fee, can be money spent for nothing.

If your real target is a US PE licence, the FE exam is the first step toward US PE licensure in most states, and you can write it from Canada at any Pearson VUE testing location in North America offering the exam, including Edmonton and Calgary. Contact the specific state board for its requirements.

Which Fundamentals Of Engineering Exam Prep Courses Are Worth Taking?

FE prep courses range from a two-week Georgia Tech review on Coursera to NPPE-focused programs from OSPE and the University of Toronto, plus a BCIT professional-practice microcredential, and the right pick depends on which exam you are actually facing.

Fundamentals of Engineering Exam Review

Fundamentals of Engineering Exam Review is a 2 weeks at 10 hours a week online course from Georgia Institute of Technology that refreshes the technical fundamentals the FE exam tests.

ProviderGeorgia Institute of Technology
Length2 weeks at 10 hours a week
Rating4.7 (616 reviews)
CredentialShareable certificate
Formatonline

Fiona's take: This is the course I point clients to first, because it answers the only question that matters at the start: is the material still in your head? It carries a 4.7 rating from 616 reviews and a shareable certificate, so it gives you a low-stakes commitment before you pay APEGA and NCEES. It does not register you for the exam or substitute for any regulator decision.

Skip it if: Skip it if you have already been assigned the exam and need drilled practice with 110-question timing, which a dedicated exam-prep course covers better.

Start On Coursera

Fundamental Skills in Engineering Design

Fundamental Skills in Engineering Design is an online course from the University of Leeds related to engineering design fundamentals.

ProviderUniversity of Leeds
Formatonline

Fiona's take: I see this as a general design course, not FE-specific prep. If you are weighing whether engineering fundamentals still interest you before committing to licensure fees, it is a reasonable starting point.

Skip it if: Skip it if you are preparing for the FE exam, because it is not FE-specific prep.

Start On Coursera

Mechanics of Materials Fundamentals

Mechanics of Materials Fundamentals is an online course from EDUCBA.

ProviderEDUCBA
Formatonline

Fiona's take: This is a focused single-topic course on mechanics of materials. It has no listed length or rating, so I would confirm its syllabus against your discipline's exam plan before enrolling.

Skip it if: Skip it if you want FE-specific prep with a stated length or rating.

Start On Coursera

[NEW] FE Exam - Exam Preparation 2026

[NEW] FE Exam - Exam Preparation 2026 is an online course from Certification Interview Academy aimed at full FE exam preparation.

ProviderCertification Interview Academy
Formatonline

Fiona's take: The course is described as practice-focused FE preparation that reviews essential engineering concepts. I tell clients to check the sample lessons before buying any exam-prep course, and to confirm the discipline matches the one you registered for.

Skip it if: Skip it if you prefer a course with published ratings and reviews to judge quality by.

View On Udemy

Fundamentals of Engineering (FE) Exam Review

Fundamentals of Engineering (FE) Exam Review is an online course from John Peterson that reviews FE exam content.

ProviderJohn Peterson
Rating4.4 (655 ratings)
Formatonline

Fiona's take: With a 4.4 rating from 655 ratings, this is a well-reviewed general review option. It competes directly with the Georgia Tech Coursera course, so the choice comes down to format preference and how you like to study.

Skip it if: Skip it if you want a university-branded certificate you can share with an employer or regulator.

View On Udemy

Engineering Licensure Readiness Program – CBA and NPPE Prep

Engineering Licensure Readiness Program (CBA and NPPE Prep) is a virtual program from OSPE that prepares Ontario-bound engineers for competency-based assessment and the NPPE.

Screenshot of the Engineering Licensure Readiness Program – CBA and NPPE Prep program page on the OSPE website
The Engineering Licensure Readiness Program – CBA and NPPE Prep page on the OSPE website.
ProviderOSPE
Formatvirtual, ON

Fiona's take: This is the course I recommend for the exam Canadians actually need. The NPPE on ethics, law and professionalism is required by most provincial regulators, and OSPE builds this program around the CBA process as well. It does not prepare you for the FE exam, and that is fine, because the FE exam is not mandatory.

Skip it if: Skip it if you are an Alberta applicant assigned the FE exam specifically.

See Program Details

Canadian Engineering Professional Practice, Microcredential

Canadian Engineering Professional Practice, Microcredential is a one year (up to seven years) part-time online microcredential from BCIT covering professional practice in the Canadian context.

Screenshot of the Canadian Engineering Professional Practice, Microcredential program page on the BCIT website
The Canadian Engineering Professional Practice, Microcredential page on the BCIT website.
ProviderBCIT
Lengthone year (up to seven years)
CredentialMicrocredential
Formatonline, BC

Fiona's take: BCIT's microcredential suits internationally trained engineers learning how professional practice works in Canada, especially in British Columbia. The one-year part-time structure lets you work while you study, and the microcredential is a formal credential rather than a casual certificate.

Skip it if: Skip it if you want short, exam-focused prep measured in weeks rather than a year.

See Program Details

National Professional Practice Examination (NPPE) Preparation Course: LIEP

National Professional Practice Examination (NPPE) Preparation Course: LIEP is an online course from the University of Toronto School of Continuing Studies that prepares candidates for the NPPE.

Screenshot of the National Professional Practice Examination (NPPE) Preparation Course: LIEP program page on the University of Toronto School of Continuing Studies website
The National Professional Practice Examination (NPPE) Preparation Course: LIEP page on the University of Toronto School of Continuing Studies website.
ProviderUniversity of Toronto School of Continuing Studies
Formatonline, ON

Fiona's take: For engineers who find the NPPE intimidating, a structured preparation course from a school like the University of Toronto School of Continuing Studies removes the guesswork. I tell clients that the NPPE covers ethics, law and professionalism, required by most provincial regulators.

Skip it if: Skip it if you already work in Canadian professional practice and know the material cold.

See Program Details

Journey to P.Eng. Designation Preparation program

Journey to P.Eng. Designation Preparation program is a virtual program from OSPE that walks Ontario candidates through the full path to the P.Eng designation.

Screenshot of the Journey to P.Eng. Designation Preparation program program page on the OSPE website
The Journey to P.Eng. Designation Preparation program page on the OSPE website.
ProviderOSPE
Formatvirtual, ON

Fiona's take: This program covers the whole licensure journey rather than one exam, which suits internationally trained engineers mapping an unfamiliar system. It is Ontario-focused, reflecting OSPE's base, so Alberta and BC candidates should check equivalency with their own regulator first.

Skip it if: Skip it if you only need one exam prepared for, not the whole designation roadmap.

See Program Details

Technical Exams Preparation Courses

Technical Exams Preparation Courses is a provider program from EPIC Training that prepares candidates for technical exams.

Screenshot of the Technical Exams Preparation Courses program page on the EPIC Training website
The Technical Exams Preparation Courses page on the EPIC Training website.
ProviderEPIC Training
FormatON

Fiona's take: EPIC prepares engineers for technical and confirmatory exams assigned by provincial regulators, including PEO. I recommend checking which specific technical exams the course covers before enrolling, because regulators assign them by discipline.

Skip it if: Skip it if your regulator has assigned only the FE exam, which NCEES-specific prep handles.

See Program Details

Preparatory Course for the National Professional Practice Exam (NPPE)

Preparatory Course for the National Professional Practice Exam (NPPE) is a 4 weeks virtual course from OSPE that prepares candidates for the NPPE.

Screenshot of the Preparatory Course for the National Professional Practice Exam (NPPE) program page on the OSPE website
The Preparatory Course for the National Professional Practice Exam (NPPE) page on the OSPE website.
ProviderOSPE
Length4 weeks
Formatvirtual, ON

Fiona's take: Four weeks is a tight, realistic commitment for the NPPE, and OSPE's focus on the Ontario licensure journey makes this the pick for PEO applicants. If the FE exam is your only hurdle, this course is not the right tool.

Skip it if: Skip it if you have not yet confirmed with your regulator whether the NPPE applies to you.

See Program Details

How Much Does The FE Exam Cost In Canada?

The FE exam lists two fees through APEGA: $75 CAD plus GST payable to APEGA and $225 USD payable to NCEES.

FeeAmountPayable To
APEGA administration fee$75 CAD + GSTAPEGA
NCEES exam fee$225 USDNCEES

Two fees, two payees. The APEGA administration fee covers the registration side through myAPEGA, while the $225 USD NCEES fee covers the exam itself at Pearson VUE. Note the second is in US dollars, so budget for the exchange rate when you plan.

The broader licensure route costs more. The Canadian P.Eng licensure route carries a typical cost of about $500, on top of 4+ years of post-degree experience. The FE exam is a small line item inside a much larger process, and where no regulator has assigned it, you can avoid it.

Prep course costs vary by provider, so treat any course purchase as optional spending. I tell clients to cap prep spending relative to the combined exam fees, $75 CAD plus GST to APEGA and $225 USD to NCEES, and to start with the Coursera review before committing to a paid multi-week program.

How Much Does A Civil Engineer Earn In Canada?

Civil engineers earn a median of $48.56 per hour in Canada under NOC 21300, according to Job Bank, with provincial medians ranging from $47.12 in British Columbia to $51.69 in Alberta.

RegionMedian Hourly Wage (NOC 21300)
Canada$48.56
Alberta$51.69
British Columbia$47.12
Ontario$48.08
Quebec$49.74

Job Bank lists a national low, median and high range of $32.00, $48.56 and $72.12 per hour for NOC 21300, which tells you the spread across the occupation is wide.

The outlook is moderate to good depending on province. Alberta pays the highest median at $51.69 per hour, and Alberta is relevant here because APEGA may assign the FE exam. Compare the exam fees, $75 CAD plus GST to APEGA and $225 USD to NCEES, against those wage figures.

Is The FE Exam Worth It In 2026?

The FE exam is not mandatory for Canadian licensure. APEGA may assign you the FE exam, on its own or with other technical exams, to confirm your technical engineering knowledge, and the Canadian P.Eng route treats the FE as optional or assigned. APEGA's guidance is blunt: do not write the FE exam before receiving a Board of Examiners decision, as you may not need to write it. Spending $225 USD on an exam no regulator asked for is the classic mistake I work hard to talk clients out of.

For two groups, it is worth it. Alberta applicants assigned the exam by APEGA have no choice, and engineers targeting US PE licensure need the FE exam as the first step in most states. In both cases the exam runs year-round at Pearson VUE centres, so timing is flexible and results land in 7 to 10 days.

If your regulator has not assigned the FE exam, focus on the NPPE; if APEGA assigns the FE exam, follow that decision. The NPPE covers ethics, law and professionalism and is required by most provincial regulators. A 4-week OSPE prep course or the University of Toronto preparation course targets the exam Canadians actually must pass.

FE Exam Questions Canadians Ask

Is The FE Exam Required To Become A P.Eng In Canada?

No, the FE exam is not required for P.Eng licensure. Canadian licensure generally requires an accredited or assessed-equivalent degree, acceptable experience or competency-based assessment, and the NPPE or its provincial equivalent. The FE exam is used optionally, or when a regulator such as APEGA assigns it for technical confirmation.

Which Canadian Regulator Uses The FE Exam?

APEGA is the Canadian regulator that uses the FE exam. Its Board of Examiners may assign the FE exam to applicants, on its own or with other technical exams, to confirm technical engineering knowledge. Other regulators use their own technical exams or syllabi rather than the NCEES FE exam.

What Is The Cost Of The FE Exam Through APEGA?

The FE exam through APEGA costs two fees: $75 CAD plus GST payable to APEGA for administration, and $225 USD payable to NCEES for the exam itself. Remember the NCEES portion is in US dollars, so the real Canadian total moves with the exchange rate on exam day.

Can I Write The FE Exam For US PE Licensure From Canada?

Yes, the FE exam is the first step toward US PE licensure in most states, and you can write it from Canada at any Pearson VUE testing location in North America offering the exam, including Edmonton and Calgary. Contact the specific state board you are targeting, because state requirements beyond the FE exam vary.

How Long Is The FE Exam And What Is Its Format?

The FE exam is 110 multiple-choice questions over 6 hours, computer-based, taken at Pearson VUE centres. NCEES administers it year-round rather than on fixed dates, and results arrive in 7 to 10 days. It covers one of seven engineering disciplines, which you choose when you register.

What Is The Main Exam For P.Eng In Canada Instead Of The FE?

The main exam for P.Eng in Canada is the National Professional Practice Examination (NPPE), which covers ethics, law and professionalism and is required by most provincial regulators. Prep options include OSPE's 4-week preparatory course and the University of Toronto School of Continuing Studies preparation course. The FE exam plays no part in this requirement.

Where Can I Take The FE Exam In Alberta?

You can take the FE exam at any Pearson VUE testing location in North America offering the exam, including Edmonton and Calgary. Availability is year-round, so you can schedule around work. APEGA members, members-in-training and applicants may all write the exam once registered.

What Is The Median Wage For Civil Engineers In Canada?

The median wage for civil engineers in Canada is $48.56 per hour nationally under NOC 21300, per Job Bank. Alberta sits highest among the listed provinces at $51.69, British Columbia lowest at $47.12, and the national range runs from $32.00 to $72.12 per hour.

What's The Bottom Line On The Fundamentals Of Engineering Exam?

  • The FE exam is not a Canadian licensure requirement: APEGA may assign it to Alberta applicants, but Canadian P.Eng licensure rests on an accredited degree, about 48 months of experience and the NPPE.
  • Writing it costs $75 CAD plus GST to APEGA and $225 USD to NCEES, takes 6 hours and 110 questions, and results arrive in 7 to 10 days.
  • Never write the FE exam before the APEGA Board of Examiners decides you need it, because you may not need to write it at all.
  • Start with Fundamentals of Engineering Exam Review from Georgia Tech, 2 weeks at 10 hours a week, to test your recall before you pay a dollar in exam fees.
  • If your regulator has not assigned the FE exam, focus on the NPPE; if APEGA assigns the FE exam, follow that decision. OSPE and University of Toronto courses target the NPPE, the exam most provincial regulators actually require.

About the author

Fiona Thompson

Fiona Thompson is an education consultant who has dedicated her efforts to assisting international students in coming to study in Canada. However, during her work, she realized that many Canadians were unaware of the affordable online options available for studying within their own country. With her extensive research and experience in the education sector, Fiona decided to create CanadaCourses.ca, a website aimed at helping Canadians find the best online course options available across various industries.